Gallery wall anchor positions
Centre a row of different-sized frames and translate each fixed hook offset into a wall anchor coordinate.
The example value has been entered. Check it immediately or change the value.
Input is processed in the browser. Refreshing returns a sample value.
Instructions and example
Left start=(wall width−sum of frame widths−total gaps)/2. Anchor coordinate=frame top-left position+its hook offset.
On a 200 cm wall, frame widths 40 and 60 cm with a 10 cm gap start at 45 cm. With top 50 cm and hooks (20,5) and (30,5), anchors are (65,55) and (125,55) cm.
Single top-aligned row with a fixed hook per frame. Up to 30 frames; sides must be above 0 and at most 1,000 cm, with hooks inside. Loads, wall structure and wire sag are not checked.
Frequently asked questions
Where do I measure the frame hook offset?
Use the top-left corner as seen from the front, with x rightward and y downward. Convert measurements taken from the back to front-view coordinates.
Are frames of different heights vertically centred?
This tool aligns all frame tops at the same height. It rejects a layout if a frame bottom exceeds the wall boundary.
Calculation criteria and reference materials
The calculation formula and scope of this tool are disclosed in the above description. Examples can be checked by substituting input values into the formula or following the specified string and calendar handling rules.
Verification of calculation criteria: · Calculation·verification principles · Report errors