Quilt binding strip plan

Calculate binding strips, joined length and fabric length while accounting for every strip joint and finishing allowance.

The example value has been entered. Check it immediately or change the value.

Input is processed in the browser. Refreshing returns a sample value.

Result

Instructions and example

Required length=2×(width+height)+allowance. Joined length for n strips=n×usable length−(n−1)×join loss. Choose the smallest valid integer n.

For a 100×150 cm quilt, 20 cm allowance, 100 cm strips and 6 cm join loss, 6 strips give 570 cm. A 6 cm strip width requires 36 cm of fabric.

At most 10,000 straight-grain strips. Join loss must be below strip length. Pattern matching, bias cutting, shrinkage and retailer increments are excluded.

Frequently asked questions

Why are there fewer joins than strips?

Joining n strips into an open continuous strip creates n−1 joints. Include the final end closure in the separate finishing allowance.

Should I enter the finished binding width?

Enter the actual cut width before folding. Determine that width from the instructions for your chosen binding technique.

Calculation criteria and reference materials

Verification of calculation criteria: · Calculation·verification principles · Report errors