Weaving warp plan

Plan warp ends and colour lengths from finished dimensions, shrinkage, take-up, loom waste and full colour repeats.

The example value has been entered. Check it immediately or change the value.

Input is processed in the browser. Refreshing returns a sample value.

Result

Instructions and example

Round width÷(1−shrinkage)×density up to a full colour repeat. Length per end=pieces×finished length÷[(1−shrinkage)(1−take-up)]+loom waste.

Width 20 cm, density 2 ends/cm and repeat 2,2 give 40 ends. For 2 pieces of 100 cm, 50 cm loom waste and 0% losses, each end is 2.5 m: 100 m total.

Maximum 100,000 ends. This planning model uses the same shrinkage for width and length. Weft, fringe and gaps between pieces are excluded; add needed length beforehand.

Frequently asked questions

Can the colour repeat increase the woven width?

Yes. The end count rounds up to complete colour repeats. The result separately shows the expected finished width for that count.

How do take-up and loom waste differ?

Take-up is the fraction of weaving-section warp length lost during interlacing. Loom waste is a fixed length added to the whole warp, not each piece.

Calculation criteria and reference materials

Verification of calculation criteria: · Calculation·verification principles · Report errors